Finoric LLC Call Toll-Free: 1-855-FINORIC Houston Pleasanton & Midland, Texas, Oklahoma and Chicago, Illinois, USA Email: info@finoric.com

--------  --------

Oil Well Drilling Fracturing Encap Encapsulated Gel Breaker Supplier

Key words: Shale Gas Hydraulic Fracturing Oil Well Fracking Drilling Chemicals, Encap Encapsulated Gel Breaker, Midland and Houston Texas, Williston North Dakota, Mansfield Pennsylvania, Zanesville Ohio, USA.

FInOrIC is the internationally preferred source for Stimulation Chemicals and Hydraulic Fracturing Chemicals. In USA. we serve various oil and gas producing areas like Permian Basin, Williston Basin, Utica Shale, Austin Chalk, Eagleford Shale, Barnett Shale, Marcellus Shale. We are never too far from your well-site with multiple 24/7 company owned warehouses in the US and across the world. With customers in 55 countries across 5 continents, we source and sell almost all the fracturing chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland and Houston Texas and associates and Toll Manufacturing facilities at several locations we are a truly multi-national chemical manufacturer and distributor.

We are suppliers and manufactures of Shale Gas Chemicals and Fracturing Oil Well Fracking Drilling Chemicals as under:

Encapsulated Gel Breaker is a temperature dependent releasing oxidizer, used in oil well fracking. It is offered as low temperature grade and high temperature delayed release grade.

We offer controlled release temperature dependent material having specifications as under:

Active matter: Ammonium persulfate 80%
Polymer coating: 20%. Polymer coating of several different level is offered.
Mesh size: 15-40mesh
Specific Gravity: Approximate 1.75
Release time: Does not release at room temperature and negligible release up to 50C or 125F. Releases slowly when temperature is increased to 65C or 150F. Almost all the active matter will be released in 18 hours at 65C.

Active matter: Encap Encapsulated Potassium persulfate 70%
Polymer coating: 30%. Polymer coating of several different level is offered.
Mesh size: 15-40mesh
Specific Gravity: Approximate 2
Release time: Does not release at less than 195F or 90C temperature. Releases slowly when temperature is increased to greater than 90C or 195F. It is recommended for use when down-hole temperatures up to 300F or 150C are expected.

Active matter: Encap Encapsulated Sodium Bromate 65%
Polymer coating: 35%. Polymer coating of several different level is offered.
Mesh size: 15-40mesh
Specific Gravity: Approximate 2.5
Release time: Does not release at room temperature and negligible release up to 115C or 240F. Releases slowly when temperature is increased to 280C or 330F. It is recommended for use when down-hole temperatures 280F to 330F or 138C to 165C expected.

 

Please Click here to Enlarge
This is tested at slow rpm. Testing at higher turbulence, with sand suspended along with, 75% of the release is in 6 hours.

An actual user has given us a comparision of our breaker as against what they used before that.

Please Click here to Enlarge

Applications:
Oil field – Oxidizing Encap Gel Breaker for Guar slurries used in fracturing. In fracking or frac jobs, after proppant is placed, fluid viscosity needs to be reduced.  All Guar based systems can be broken using oxidizing breakers. GB-2 generates free radicals of oxygen to efficiently oxidize and break all types of guar gels.

Chemical Structure:
It is a Persulfate salt with a temperature dependent release. We offer both immediate release and encapsulated delayed release low temperature and high temperature version.

Route of Action: Free radical generation starts upon dissolution is water and is accelerated at fluid temperatures of 120 F and above.  GB-2 can be used up to fluid temperatures of 200 F.

Environment: It is not hazardous to the environment.

Packaging:
50 lb pails, 1200 lbs per pallet.
55 lb pails, 1320 lbs per pallet.
55.1 lb bags, 2204 lbs per pallet; 2204 lb super sacks, 1 per pallet.
Special pack sizes available upon request.

Availability: Midland, Pleasanton Beasley, TX.

DoT Classification: Haz Mat, Class 5.1 Oxidizer; UN 1444, 5.1, III

Finoric LLC
Houston, Pleasanton & Midland, Texas, and Chicago, Illinois, USA.

Tel: 773-829-5811
Email: info@finoric.com

Most products offered from our Midland & Houston, TX and Oklahoma area warehouse

We solicit inquiries for contract manufacturing, processing (blending, making solutions, sieving) & re-bagging needs at our Houston facility on toll manufacturing basis.
We are looking for Technical Sales Representatives and agents in Williston North Dakota, Mansfield Pennsylvania and Zanesville Ohio.

Ammonium Persulfate:
Acetic Acid Solution:
ATMP Phosphonate:
Ammonium Bifluoride:
BHMT or BHMTPMPA:
Barium Sulfate Remover:
Calcium Chloride:
Cement Defoamer:
Citric Acid:
Choline Chloride:
Crosslinking Agent Boron based:
Crosslinking Agent Zirconium based:
Clay Stabilizer:
DETA or DTPMP Phosphonate:
Didecyl Dimethyl Ammonium Chloride:
Flow Diverting Agent Low & High Temperature:
Friction Reducer:
Gel Breaker Encap or Encapsulated:
Glutaraldehyde Solution:
Glycerin Solution:
HEDP Phosphonate or Hydroxyethylidene Diphosphonic Acid:
Hydroxy Ethylidene,1-Diphosphonic Acid Potassium salt, HEDP-Kx:
Hydrogen Sulfide Scavenger:
KCl Substitute:
Potassium Chloride:
Tetrakis Hydroxymethyl Phosphonium Sulfate THPS:
Scale Inhibitor:
Sodium Acetate:
Sodium Glutaraldehyde Bisulfite Bisulphite:
Zinc Chloride:
Biocide: